1 OPN2004/OPN2005/PX20 Batch demo application Version RFI37938 (OPN2004&5) / RFM37938 (PX20) February 21, 2014 Opticon Sensors Europe BV Opt
10 9 Using the USB-VCP interface When the USB-VCP interface has been selected (see chapter 3.1), the barcode database file can be transmitted to a
11 In the Receive Files(s) Dialog the task can be configured as shown in the following image. Finally, select ‘Options’ > ‘Start Protocol’.
12 When using USB-VCP and the USB cable to retrieve your data, then the RS232 configuration of NetO32 is limited to selecting the correct COM-port
13 10 Loading software on the barcode reader The following chapter will describe how to load new software onto the barcode readers. Important note
14 11 Other available applications Besides this batch demo application, there are other applications available on our web site that might fit your s
15 11.1 Trouble shooting Since the barcode readers don't have a display, they also don't have a system menu to resort to when a crashing a
16 12 Version history RFG35410 First release December 7, 2009 RFG35411 Added configurable database formatting December 14, 2009 RFG35412 Fixed very
17 Appendix A: Database output formatting The default output format of each record in the database file is: <Barcode>,<Quantity>,<se
2 Contents 1 OVERVIEW ... 3
21
3 CAUTION: This information is subject to change without prior notice. Copyright 2014, Opticon Sensors Europe BV, all rights reserved. This manual
4 2 System Requirements 2.1 Minimum required OS version This demo application requires the OS version: OPN2004: RBIV0026 (or higher) OPN2005:
5 3 Customizing your barcode terminal In the following section a brief overview is given on how to configure your barcode reader for your desired a
6 3.2 OSE Universal Menu Book support The barcode readers this demo application supports can be configured by scanning various configuration barcod
7 4 Barcode database file All scanned unique barcodes are stored in a database file with non-fixed length records. Besides the barcode data, the qu
8 5 Scanning barcodes This demo application uses the trigger button to enable the scan engine to scan barcodes. If a barcode is read using the tr
9 7 Installing drivers 7.1 USB-VCP drivers To be able to communicate with the barcode readers using USB-VCP, you will need to have Opticon’s USB
Comments to this Manuals