Opticon OPL 9713 User Manual download pdf

OPL97139062-0-00

Quick Start Guide

• Read this quick start guide carefully before installing and/or using this product.

• Keep this quick start guide for future reference and store in a safe place.

• The OPL-9713 is a laser data collector with a GPS feature. The GPS feature makes it possible to add

location data and a time stamp to scanned barcode data.

Introduction

OPL

9713

Overview

■

OPL-9713 Basic Specifications

Parameter Specifications

Physical

Features

Size (H) 129

(W) 44

(D) 26 mm Max

Weight 110g Max (excluding batteries)

Color Light gray

Control

Section

CPU 16-bit CPU

Clock Frequency

14.74MHz

External

Memory

FLASH ROM

512KB for BIOS and AP

(2MB ﬂash memory is optionally available)

SRAM 512kB (for WORK and DATA)

Display

Section

LED Tri-color LED (Blue, Red and Green)

Buzzer Loudness : 75dBA or higher

Operation Section

Keys 1 Key

Scanning

Section

Light Source Red laser diode

Wavelength / Output

650

10nm / 1mW or less

Scan Rate 100 scans / sec

Supported

Symbologies

JAN/UPC/EAN (WPC), Codabar/NW-7, Code 39,

Code 93, Code 128, Industrial 2of5, Interleaved 2of5

Power Supply

Section

Main Battery

Lithium-ion secondary battery

（

600mA

）

Backup Battery

Lithium-ion secondary battery

（

3.4mA )

Operating Time

50 hours or longer

Data Retention Time

7 hours or longer (with GPS operations)

Clock Section

Real Time Clock (RTC)

Supports year, month, day, hour, minute. (Leap year supported.)

Comm.

Section

IrDA

Speciﬁcation : IrDA Ver1.2 Low Power

Baud rate : 2400bps to 115.2kbps

GPS

GPS Module : SIRF GSC3 Chip

Reception Frequency : 1575.42 MHz

Channels : 20 Max

Antenna : Patch antenna (20 mm x 20mm)

Durability

Operating Temp.

0 deg. C to 40 deg. C

Operating Humidity

20% to 85% (non-condensing)

Storage Temp.

-20 deg. C to 60 deg. C

Storage Humidity

20% to 90% (non-condensing)

Charging Temp.

0 deg. C to 40 deg. C

Dust- and Drip-proof

IP54

Shock

Dropped 3 times onto concrete from a

height of 150 cm with no defects found.

Notice

• This quick start guide may be revised or withdrawn at any time without prior notice.

• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any

electronic or machine readable form without prior written consent of Opticon.

• Trademarks used are property of their respective owners.

• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect dam-

ages, howsoever caused.

Caution and Warning

1. Laser Safety

• Do not stare into the laser beam.

2. Handling Instructions

【

OPL-9713

】

• Do not attempt to disassemble, modify or update this device.

• Operating the scanner while operating machinery or a vehicle can be distracting.

• Do not drop this product or put heavy items on this product.

• Do not insert foreign substances into the device.

• Do not use this product in the following areas:

- In areas exposed to direct sunlight for long periods of time.

- In dusty environments.

- Near water or other liquids, or in extremely high humidity.

- Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.

- Near microwaves, medical devices, or low-power radio stations.

• When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.

【

Battery

】

• Do not attempt to disassemble the battery.

• Do not expose the battery to heat sources including other devices that produce heat.

• Do not short the power leads on the battery. If the (+) and (-) terminals come in contact with metals (such as a necklace or

hairpin), a short-circuit will occur.

• Do not load the battery with the (+) and (-) terminals reversed.

• If you come into contact with material from a leaking battery, take the following actions:

- If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention.

- If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water. Consult

your physician if inflammation or soreness develops.

• Check local regulations for proper battery disposal.

( Please refer to the specification manual and instruction guide for details.)

■

Detailed View

①②③

⑤

⑦⑧

⑥

④

No. Item Function

1 Data Collector A laser barcode collector with a barcode scanning feature.

2 Lithium-ion Battery Pack Designated battery pack for the OPL-9713.

3 Strap

4 Quick Start Guide Provides product information and instruction guide.

Before Getting Started

■

What's in the Box

Confirm that you have the following items before getting started:

* The number of accessories may differ depending on the product specification.

Please contact the nearest dealer if accessories are damaged or missing.

The Netherlands

Opticon Sensors Europe B.V.

tel: +31 (0)23-5692700

email: [email protected]

U.S.A.

Opticon Inc.

tel: 800-636-0090

email: [email protected]

France

Opticon S.A.S.

tel: +33 (0)1-41461260

email: [email protected]

Germany

Opticon Sensoren GmbH

tel: +49 (0)6074-91890-0

email: sales.de@opticon.com

Italy

Opticon s.r.l.

tel: +39 (0)051-6321800

email: opticon@opticonitalia.it

Spain

Opticon Sensores S.L.

tel: +34 (0)902-747469

email: [email protected]

Contact

Sweden

Opticon Sensors Nordic AB

tel: +46 (0)8-58548560

email: henrik@opticon-sensors.se

United Kingdom

Opticon Limited

tel: +44 (0)1582-635100

email: [email protected]

Taiwan

Opticon Far Eastern Ltd.

tel: +886 2-27597444 / email: [email protected]

China

Opticon Sensors Europe B.V., Shanghai Representative Oce

tel: +86 21-64480881

email: [email protected]

Australia

Opticon Sensors Pty. Ltd.

tel: +61 (0)2-43402666

email: [email protected]

Brazil

Opticon Sensors Europe B.V., Latin American Oce

tel: +55 11-5081 2088

email: [email protected]

Please contact OPTICON or your local dealer.

More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.

No. Part Function

①

Scan Key Starts a barcode scanning operation.

②

GPS Antenna

Receives information from a GPS satellite

and calculates a position solution.

③

Status LED

(Blue, Red and Green)

Alerts users to the status of the scanning

operation and data communication.

④

Optical Window

The scan engine emits a laser beam through the

optical window while scanning a barcode.

⑤

Charging Terminals

Electrical terminals for power distribution

and power management.

⑥

Battery Cover

Protects the battery pack.

⑦

Buzzer Hole

⑧

Strap Hook

TTFF (Time To First Fix)

TTFF is the time required for a GPS receiver to acquire satellite

signals and navigation data, and calculate a position solution.

The TTFF for the OPL-9713 is as follows:

Memo

Hot Start

1 sec.

Warm Start

38 sec.

Cold Start

42 sec.

Designated Cradle

(Optional )

* To connect the cradle to a host using a dedicated USB cable, you must first install a dedicated USB driver on the host.

* Please refer to the specification manual or the instruction guide for details of designated cradles.

CRD-9723

Communication &

Charging Cradle

Communication Method

(Cradle to Host)

Communicates with the host

via RS-232C or USB interface.

Size

(H) 67.5

(W) 71.5

(D) 98.5 mm Max

Weight

85g Max (excluding AC adapter and cable)

Charging Time 3.5 hours

RS-232C

USB

Line-up of CRD-9723 series:

- single-bay cradle (1 x charging, 1 x communication)

- multi-bay cradle (5 x charging, 1 x communication)

- multi-bay cradle (5 x charging, 5 x communication)

Charging Cradle CRD-9722:

- single-bay cradle (1 x charging, no communication)

CRD-9723 1

Summary of Contents

Page 1 - CRD-9723

OPL97139062-0-00Quick Start Guide• Read this quick start guide carefully before installing and/or using this product.• Keep this quick start guide for

Comments to this Manuals

No comments

Opticon OPL 9713 User Manual

Browse online or download User Manual for Equipment Opticon OPL 9713. Opticon OPL 9713 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Opticon OPL 9713